Red Earth Steels Pvt Ltd is reckoned amongst the prominent in Opening Flanges Manufacturer. ASME B16.36 flanges are orifice flanges and they are used for measuring the flow of fluid that has been transported through a pipeline, via a flow nozzle, that has been kept on the flange. Opening flanges of ASME B16.36 can be obtained from Class #300 - Class #2500. Opening Class #300 flanges are procurable in types such as weld neck end, slip-on and threaded. Opening Class #600 and flanges above that Class, can be obtained in only weld neck type end. Opening flanges of ASME B16.36 are produced in various grades and sizes. Opening flanges of ASME B16.36 are obtainable in a variety of standard materials and special materials such as A182 F316 Stainless Steel, A182 F22 2¼% Cr 1% Mo, A105 Carbon Steel, A182 F304 Stainless Steel, A350 LF2 Low Temp Carbon Steel and A182 F11 1% Cr ½% Mo.




When the inspection of ASME B16.36 Opening flanges is being carried out, it is crucial to check for the length of the hub, bolt circle and bolt hole diameter, straightness and alignment of the bolt hole, thickness of weld end, outer and inner diameter of body and tap holes dimensions. Opening flanges of ASME B16.36 are available in weld neck, threaded and socket weld, they are obtainable in different dimensions and they are also available in all ASTM forged grades (182, A350, A105 and A694). An Opening flange union is 2 orifice flanges joined together. Opening flanges are basically the same as slip on flanges or weld neck flanges, the differences being that stainless steel Opening flanges of ASME B16.36 have extra machining and another difference is that in the flange ring, orifice flanges have radial, tapped holes. This serves as the purpose of meter connections and so that additional bolts can serve as jack screws to allow for the separation of flanges, at the time of replacement or inspection of the orifice plate.
ANSI/ASME B16.36 Opening flanges are used together with orifice meters and in this way it becomes possible to measure the flow rates of gas, oil and other liquids that have been transported in a pipeline. The conventional assembly of Opening flanges includes nuts, Opening plate, bolts, plugs, gaskets, a couple of flanges and jacking screws. Because of the jacking screws, easy removal of the primary flow element is accomplished. When there is a need for the installation of a flow nozzle or an orifice plate, instead of using standard pipe flanges, Opening flanges of ASME B16.36 are used. Generally, Opening flanges are available in RTJ (Ring Type Joint) facings or as Raised Faces. The most used Opening flanges of ASME B16.36 are weld neck flanges and the most popularly used among these are Threaded Class 300, Slip On Class 300 and Welding Neck Classes 900, 300, 2500, 600, 400 and 1500. Opening flanges of ASME B16.36 can be constructed from a variety of materials such as carbon steel, alloy, stainless steel and any other suitable material.
Please note this is an approx Price of Opening Flanges in India. For final Opening Flanges price in India please mail us.
| ASME B16.5 Opening Flanges Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Opening Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Opening Flanges Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Opening Flanges |
| Opening Flanges Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Opening Flanges |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Opening Flanges |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar Opening Flanges |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar Opening Flanges |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Opening Flanges |
| Most common types of Opening Flanges | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
| Opening Flanges Uses & application |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Red Earth Steels PVT LTD is a manufacturer and supplier of Opening Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

| Material of construction | degree | default |
|---|---|---|
| stainless steel opening flanges | F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H, 317, 317L, 321, 321H, 347, 347H, 201, 202, 904L |
ASTM A182, A240 |
| Material of construction | degree | default |
|---|---|---|
| alloy steel opening flanges | F1, F5, F9, F11, F22, F91 | ASTM A182 |
| Material of construction | default | degree |
|---|---|---|
| Carbon steel opening flanges | ASTM A105 | Gr. F42,46,52,56,60,65,70 |
| Low Temperature Carbon Steel Orifice Flanges | ASTM A350 | LF2, LF3 |
| Material of construction | default | degree |
|---|---|---|
| Carbon steel opening flanges | ASTM A105 | Gr. F42,46,52,56,60,65,70 |
| Low Temperature Carbon Steel Orifice Flanges | ASTM A350 | LF2, LF3 |
| Material of construction | default | degree |
|---|---|---|
| Monel opening flanges | ASTM SB564, SB160, SB472, SB162 | Monel 400 (UN No. N04400), Monel 500 (UN No. N05500) |
| Material of construction | default | degree |
|---|---|---|
| Nickel alloy opening flanges | ASTM SB564, SB160, SB472, SB162 | Nickel 200 (UN No. N02200), Nickel 201 (UN No. N02201) |
| Material of construction | default | degree |
|---|---|---|
| Copper Alloy orifice flanges | ASTM SB 61, SB62, SB151, SB152 | US No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), US. C 10100, 10200, 10300, 10800, 12000, 12200, |
| Material of construction | default | degree |
|---|---|---|
| Duplex orifice flanges | ASTM A182, A240 | US F 44, F 45, F 51, F 53, F 55, F 60, F 61 |
| Material of construction | default | degree |
|---|---|---|
| Hastelloy orifice flanges | ASTM SB564, SB160, SB472, SB162 | Hastelloy C 276 (UN No. N10276), Alloy 20 (UN No. N08020) |
Red Earth Steels Pvt Ltd. is a Govt. approved certified Carbon Steel Opening Flanges exporter in India. All of our Stainless Steel Opening Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. We are well-known as a trusted vendor as a Alloy Steel Opening Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.