We at Red Earth Steels PVT LTD, would like to take the opportunity to introduce as a leading Carbon Steel Flange Gasket manufacturer in India. Carbon Steel Flange Gasket are stocked or available in the following range of materials and sizes for the oil, gas, petrochemical and allied industries. Pipes with Flange Gasket can be assembled and disassembled easily. SS Flange Gasket can be forged or plate.
Table of Content
As a Stainless Steel Flange Gasket manufacturer in India we offer these Copper Flange Gasket, Copper Nickel Flange Gasket, Brass Flange Gasket, Inconel Flange Gasket, Hastelloy Flange Gasket, Monel Flange Gasket, Alloy 20 Flange Gasket, Aluminium Flange Gasket, Nickel Flange Gasket, Duplex Flange Gasket, Super Duplex Flange Gasket, Incoloy Flange Gasket, 254 Smo Flange Gasket and Titanium Flange Gasket in all standard in which the common world standards include ASA/ ANSI/ ASME (USA), BS10 (British/ Australian), PN/ DIN (European) and JIS/ KS (Japanese/ Korean). Many Alloy Steel Flange Gasket manufacturer in India produce these Carbon Steel Flange Gasket from forged materials and have machined surfaces. Compare our price from Flange Gasket manufacturers in India or China you will find best rate from our company.
Flanges Gasket type | Flanges Gasket Price in India | Flanges Gasket Price in USD | Flanges Gasket Price in UAE Dirham |
---|---|---|---|
Flange Gaskets | INR 775.25 / Kg | USD $11.20 /Kg | AED 41.14 UAE Dirham |
Stainless Steel Pipe Flange Gasket | INR 159.20 / Kg | USD $2.30 / Kg | AED 8.45 UAE Dirham |
Carbon Steel Pipe Flange Gasket | INR 221.50 / Kg | USD $3.20 / Kg | AED 11.75 UAE Dirham |
ASME B16.21 Flange Insulation Kit Gasket | INR 8306.22 / Kg | USD $120.00 /Kg | AED 440.76 UAE Dirham |
Ring Joint Flange Gasket | INR 6975.84 / Kg | USD $100.78 /Kg | AED 370.17 UAE Dirham |
The commonly used gaskets in piping are standard flange gaskets in rubber fibre or rubber, or spiral wounds. For particularly large pipes, gaskets can be manufactured in segments of joined and rubber together.
Pipe gaskets are made to fit the size of standard pipes or flanges. The most common standards are BS10 (British/Australian), ASA/ANSI (USA), PN/DIN (European), and JIS/KS (Japanese/Korean).
(To BS EN 1514-1:1967. PN 6, PN 10, PN 16, PN 25, PN 40)
(To BS EN 12560-1:2001: ASME B16.21 Class 150, Class 300, Class 600; ASME B16.47 A Class 150, Class 300, Class 600; ASME B16.47 B Class 150, Class 300, Class 600).
(To BS 3063:1965: Table A, Table B, Table E, Table F, Table H, Table J, Table K).
Red Earth Steels PVT LTD is a supplier and manufacturer of supplier offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.
Pipe gaskets can be manufactured from many different gasket materials. The right material to use depends upon the application, and environment in which the gasket will be used. The contents of the pipe, including the range of temperatures and pressures under which it is expected to operate will dictate material selection. Material specification should also take into account the flange being used. If you are in doubt about which material you need, then please contact us for technical support.
For example a non-asbestos fibre or graphite material can be specified for steam applications. For diesel or other fuels a non-asbestos fibre or quality nitrile rubber (BS 2751) should be used. Because of the extra additives in modern fuels, lower grade nitrile can be affected and break down. This is mistakenly blamed on the fuel itself when in reality it is caused by the corrosive nature of the additive.
Red Earth Steels PVT LTD is a Govt. approved certified Stainless Steel Flanges exporter in India. All of our Carbon Steel Flanges are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc. We are well-known as a trusted vendor as a Alloy Steel Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.
The thickness of a pipe gasket is governed by several requirements. The condition of the surface of the flange face has an important part to play. A thicker gasket may be required for a poor quality surface, as it will flow into and takes up the deformities on the face ensuring a good seal. With a clean and smooth flange face, a thinner gasket can be considered.
Pressure and media are other factors that can decide the thickness of gasket required. Putting too thick a gasket into a flange joint will increase the surface area that the system pressure can work against. For this reason, as a general rule: the thinner the gasket the better.
Mostly thicknesses of gasket material for pipe flanges are 1.5 mm and 3 mm.
If you know the standard size of the gasket you require then we will simply need to know: the material required, the thickness required, whether you need full-faced or IBC gaskets, and the quantity.
If the part is a special, in addition to the above information we will also need to know: the outer diameter (O.D.), the inner diameter (I.D.), the pitch circle diameter (P.C.D.), and the number of holes.
We may also need to know: the operating conditions (chemical resistance required, operating temperature, operating pressure, and state of the flanges).The chemical resistance of a pipe gasket can be increased by being lined with a PTFE envelope, or bore-liner. This is a much more cost effective alternative than using a solid PTFE gasket. The PTFE envelope fits over the pipe gasket and serves to protect it from decomposition by the aggressive chemicals in the pipe. If you have particular chemical resistance requirements then please let us know when you specify your gasket.
Pipe gaskets can be either full-faced or inner bolt circle (I.B.C). Full faced gaskets have bolt holes in them and cover a large part of the face of the flange. I.B.C gaskets, otherwise known as ring-type or raised-faced joints, sit inside the bolts fastening the pipe flanges.
The most common standards are:
BS10:2009: British standard specification for flanges and bolting for pipes, valves and fittings.
The current standard for use in the UK and Europe is BS EN 1514-1:1997. This standard took over from BS 4865-1:1989 for PN flanges.
Other standards include
Some pipes or tanks are fabricated for particular purposes and as such do not conform to set standards and dimensions. For these situations we manufacture bespoke pipe gaskets in either small batch quantities or as one-off specials.
If you are in any doubt as to whether you require a standard size or a special then please contact us with the dimensions and we will be able to tell you see below for more information on how to specify a gasket.
Red Earth Steels Pvt Ltd. is a Govt. approved certified Carbon Steel Flange Gasket exporter in India. All of our Stainless Steel Flange Gasket are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. We are well-known as a trusted vendor as a Alloy Steel Flange Gasket distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.