ASME B16.9 Eccentric Reducer Manufacturers in India

Supplier of Stainless Steel Eccentric Reducer B16.9 in India, Stockist of CS Eccentric Reducer in Mumbai

Carbon Steel Eccentric Reducer Material Distributor, Stockholder of MS Eccentric Reducer and Grooved Eccentric Reducer in UAE

An ASME B16.9 Eccentric Reducer is utilized within the piping framework between two pipes of distinctive diameters. These SS Eccentric Reducers are utilized when one of the pipes carrying a liquid is greater than the interfacing pipe. At Red Earth, Steels Pvt Ltd could be a quality Grooved Eccentric Reducer manufacturer. An Eccentric Reducer Stainless Steel has an edge that's parallel to the interfacing pipe. This parallel edge of the reducer fitting comes about within the two channels having off middle lines. The same Eccentric Reducer Schedule 40 can be utilized within the reverse as an eccentric increaser.


ASME B 16.9 Buttweld Eccentric Reducers

Table of Content

Carbon Steel Buttweld Eccentric Reducers
Carbon Steel Buttweld Eccentric Reducers
Stainless Steel Buttweld Eccentric Reducers
Stainless Steel Buttweld Eccentric Reducers
Alloy Steel Buttweld Eccentric Reducers
Alloy Steel Buttweld Eccentric Reducers

 

Red Earth Steels Pvt Ltd is devoted to proficient CS Eccentric Reducer manufacturers in India. We are the nation’s biggest distributor and supplier of Grooved Eccentric Reducer at best cost as we are one of the biggest suppliers & dealers of Eccentric Reducer Stainless Steel in India. Red Earth Steels Pvt Ltd is a dependable stockist of Stainless Steel Eccentric Reducer B16.9, MS Eccentric Reducer in different sizes.

Red Earth Steels Pvt Ltd is most greatest supplier of Eccentric Reducer Schedule 40 to Sri Lanka, Germany, Singapore, Canada, Iran, Indonesia, Oman, Israel, France, Kuwait, Sweden, Turkey, Russia, Thailand, UK, USA, UAE, Malaysia, Saudi Arabia, Australia, Bahrain, Egypt, Italy, Qatar. We keep up stocks of SS Eccentric Reducer to provide worlwide.

You can mail to info@redearthsteels.com for Stainless Steel Eccentric Reducer B16.9 to induce sensible fetched. Contact us on the off chance that you're looking to buy CS Eccentric Reducer at best cost in India, see our cost list of Grooved Eccentric Reducer counting MS Eccentric Reducer and Eccentric Reducer Stainless Steel. We are greatest manufacturer of Eccentric Reducer Schedule 40 affirmed by Saudi Aramco.

We are able to give free test of ASME B16.9 Eccentric Reducer, We are having our Dealer & Distributor in Maharashtra, Khopoli, Raipur, Punjab, Kolhapur, Faridabad, Chennai, Madhya Pradesh, Nagpur, Ahmedabad, Delhi, Chhattisgarh, Indore, West-Bengal, Gujarat, Vadodara, Kolkata, Ghaziabad, Karnataka, Uttar Pradesh, Gurgaon, Aurangabad, Bangalore, Pune, Tamil Nadu, Rajasthan, Bhosari, Rajkot, Haryana, Jaipur, Ludhiana, Karnataka. So on the off chance that you're trying to find the best cost of Eccentric Reducer Stainless Steel or SS Eccentric Reducer, CS Eccentric Reducer closes you with the briefest time conveyance or free test of ASME B16.9 Eccentric Reducer. Call us or mail to info@redearthsteels.com for the Most recent & Overhauled cost List of SS Eccentric Reducer and Eccentric Reducer Schedule 40.

What is Eccentric Reducer?

In Eccentric Reducer the decrease of the pipe size is accomplished by diminishing the diameter of the fitting at a consistent rate over a indicated length, keeping up one side of the fitting on a level plane. A Stainless Steel eccentric pipe reducer fitting is fabricated with the littler outlet off center to the bigger conclusion, which permits it to adjust with as it were one side of the gulf. The same fitting can be utilized in switch as an ASME B16.9 eccentric Reducer. In horizontal fluid channeling, Carbon Steel eccentric reducer must be introduced with level side up so that it can anticipate catching discuss within the channeling framework. As an special case, same is level side down in piperack where same Bottom of Pipe (BOP) must be kept up.

Price List Eccentric Reducer Schedule 40

Eccentric Reducer type Eccentric Reducer Price in India Eccentric Reducer Price in USD Eccentric Reducer Price in UAE Dirham
ASTM A234 CS WPB 3/4″ x 1/2″ Eccentric Reducer Price in India INR 6096.17 / Kg USD $ 88.06 /Kg AED 323.26 UAE Dirham
ASTM A234 Carbon Steel 1″ x 2″ x 1/4″ Eccentric Reducer Price List INR 8585.46 / Kg USD $ 122.86 /Kg AED 451.29 UAE Dirham
Carbon Steel Gr WPB 3″ x 2″ Eccentric Reducer in Mumbai INR 6220.72 / Kg USD $ 89.02 /Kg AED 326.99 UAE Dirham
ASTM A403 WP 304 B16.9 BW Reducer R=1.5D, SCH-40S INR 84.38 / Kg USD $ 1.19 /Kg AED 4.36 UAE Dirham
ASTM A403 WP 304 B16.9 BW Reducer R=1.5D, SCH-40S INR 362.81 / Kg USD $ 5.11 /Kg AED 18.75 UAE Dirham

Please note this is an approx Price of Eccentric Reducer in India. For final Eccentric Reducer price in India please mail us.

Eccentric Pipe Reducer Types

Sch 40 Eccentric Reducer

Sch 40 Eccentric Reducer

Sch 80 Eccentric Reducer

Sch 80 Eccentric Reducer

Sch 160 Eccentric Reducer

Sch 160 Eccentric Reducer

ASME B16.9 Buttweld Eccentric Reducer

ASME B16.9 Buttweld Eccentric Reducer

ANSI B16.9 Eccentric Reducer Fitting

ANSI B16.9 Eccentric Reducer Fitting

Din 2616 Eccentric Reducer

Din 2616 Eccentric Reducer

Eccentric Reducer En 10253 2

Eccentric Reducer En 10253 2

MSS Sp43 Bw Eccentric Reducer

MSS Sp43 Bw Eccentric Reducer

Carbon Steel Flanged Eccentric Reducer

Carbon Steel Flanged Eccentric Reducer

Stainless Steel Eccentric Reducer Type B

Stainless Steel Eccentric Reducer Type B

A403 Gr WP304 Buttweld Eccentric Reducer

A403 Gr WP304 Buttweld Eccentric Reducer

A234 Gr WPB Bw Eccentric Reducer

A234 Gr WPB Bw Eccentric Reducer

Specification of Grooved Eccentric Reducer

Specifications Eccentric Reducer
Eccentric Reducer Schedule 80 Pipe Fittings size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
Eccentric Reducer b16.9 Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Eccentric Pipe Reducer Types Seamless / ERW / Welded / Fabricated Pipe Fittings
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Eccentric Reducer Schedule 40 Type DN15-DN1200
Connection Welding
Manufacturing process Push, Press, Forge, Cast, etc.
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Eccentric Buttweld Reducer Fittings Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Eccentric Buttweld Reducer Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Eccentric Pipe Reducer Fittings Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Origin & Mills Japanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Eccentric Reducer
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • ASME B16.9 Schedule 10 Eccentric Reducer are an economical alternative for lower-pressure applications.
  • ANSI B16.9 Schedule 40 Eccentric Reducer have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Material of Eccentric Reducer Schedule 80

Prestige quality Grooved Eccentric Reducer manufacturers in India offer these Carbon Steel Eccentric Reducer b16.9 in DIN, EN, BS, ISO, JIS or ANSI standard.

Carbon Steel Eccentric Reducer
  • ASTM A105 Eccentric Reducer
  • ASME SA105 Grooved Eccentric Reducer
  • DIN 1.0402 Eccentric Reducer Schedule 80
  • DIN 1.0460 Eccentric Buttweld Reducer
  • DIN 1.0619 Eccentric Reducer Schedule 40
  • ASTM A105N Eccentric Pipe Reducer
  • ASME SA105N Eccentric Reducer Schedule 40
  • ASTM A350 LF2 Eccentric Reducer Schedule 80
  • ASME SA350 Eccentric Buttweld Reducer
  • High Yield CS ASTM A694 Eccentric Reducer b16.9
Stainless Steel Eccentric Reducer
  • ASTM A182 F304 Grooved Eccentric Reducer
  • ASTM A182 F304L Eccentric Pipe Reducer
  • ASTM A182 F316 Eccentric Buttweld Reducer
  • ASTM A182 F316L Grooved Eccentric Reducer
  • ASTM A182 F317 Eccentric Pipe Reducer
  • ASTM A182 F317L Eccentric Reducer b16.9
  • ASTM A182 F321 Grooved Eccentric Reducer
  • ASTM A182 F321H Eccentric Reducer Schedule 80
  • ASTM A182 F347 Eccentric Reducer
  • ASTM A182 F347H Eccentric Reducer Schedule 40
Alloy Steel Grooved Eccentric Reducer
  • ASTM A182 F5 Eccentric Reducer Schedule 80
  • ASTM A182 F9 Eccentric Buttweld Reducer
  • ASTM A182 F11 Eccentric Reducer
  • ASTM A182 F22 Eccentric Pipe Reducer
  • ASTM A182 F91 Grooved Eccentric Reducer
Inconel Eccentric Reducer Schedule 80
  • Inconel 600 Eccentric Buttweld Reducer
  • Inconel 601 Grooved Eccentric Reducer
  • Inconel 625 Eccentric Reducer Schedule 40
  • Inconel 718 Eccentric Reducer b16.9
  • Inconel x750 Eccentric Reducer
Copper Eccentric Buttweld Reducer T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Eccentric Reducer b16.9 Copper Nickel 90/10 (C70600 ) Grooved Eccentric Reducer, Cupro Nickel 70/30 (C71500) Eccentric Reducer, UNS C71640 Eccentric Buttweld Reducer
Brass Eccentric Reducer Schedule 40 3602 / 2604 / H59 / H62 / etc.
Hastelloy Eccentric Pipe Reducer Hastelloy C276 (UNS N10276) Eccentric Reducer, C22 (UNS N06022) Grooved Eccentric Reducer, C4 Eccentric Reducer, C2000 Eccentric Reducer Schedule 80, B2 Eccentric Buttweld Reducer, B3 Eccentric Reducer, X Eccentric Reducer Schedule 40
Monel Eccentric Pipe Reducer Monel 400 (UNS No. N04400) Eccentric Reducer, Monel 500 (UNS No. N05500) Eccentric Reducer Schedule 80
Alloy 20 Eccentric Buttweld Reducer Carpenter® 20 Alloy Eccentric Pipe Reducer, Alloy 20Cb-3 Eccentric Reducer b16.9
Aluminium Eccentric Reducer Schedule 80 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Eccentric Reducer b16.9 Nickel 200 Eccentric Reducer, Nickel 201 Eccentric Reducer Schedule 40
Duplex Eccentric Pipe Reducer S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Eccentric Reducer S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Eccentric Buttweld Reducer Incoloy 800 Eccentric Reducer Schedule 40, Incoloy 800H Eccentric Reducer, Incoloy 800HT (UNS N08800) Eccentric Reducer Schedule 80, Incoloy 825 (UNS N08825) Eccentric Reducer b16.9
254 Smo Grooved Eccentric Reducer SMO 254/6Mo Eccentric Buttweld Reducer, UNS S31254 Eccentric Reducer, DIN 1.4547 Eccentric Reducer Schedule 80
Nimonic Eccentric Pipe Reducer Nimonic 75 Eccentric Reducer, Nimonic 80A Eccentric Reducer, Nimonic 90 Eccentric Reducer b16.9
Other Eccentric Reducer Schedule 40 material Tin bronze Eccentric Reducer Schedule 80, Alumunum bronze Eccentric Pipe Reducer, Lead bronze Eccentric Pipe Reducer
Titanium Eccentric Reducer b16.9
  • ASTM B381 Titanium Gr. 1 Grooved Eccentric Reducer
  • ASTM B381 Titanium Gr. 2 Eccentric Pipe Reducer
  • ASTM B381 Titanium Gr. 4 Eccentric Reducer Schedule 80
  • ASTM B381 Titanium Gr. 5 Eccentric Reducer
  • ASTM B381 Titanium Gr. 7 Eccentric Reducer b16.9

Red Earth Steels Pvt Ltd is an ISO certified Stainless Steel Eccentric Reducer Schedule 80 manufacturer & distributor in India

Red Earth Steels Pvt Ltd is a manufacturer and supplier of Eccentric Reducer b16.9 offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

Dimensions of Eccentric Buttweld Reducer

ASME B16.9 Buttweld Eccentric Reducers dimensions

Weight Chart Of Eccentric Reducer b16.9


Nominal Diameter		 Outside Diameter
End to End
D1*D2
DN NPS Series A Series B H
20×15 3/4×1/2 26.9×21.3 25×18 38
20×10 3/4×3/8 26.9×17.3 25×14 38
25×20 1×3/4 33.7×26.9 32×25 51
25×15 1×1/2 33.7×21.3 32×18 51
32×25 1.1/4×1 42.4×33.7 38×32 51
32×20 1.1/4×3/4 42.4×26.9 38×25 51
32×15 1.1/4×1/2 42.4×21.3 38×18 51
40×32 1.1/2×1.1/4 48.3×42.4 45×38 64
40×25 1.1/2×1 48.3×33.7 45×32 64
40×20 1.1/2×3/4 48.3×26.9 45×25 64
40×15 1.1/2×1/2 48.3×21.3 45×18 64
50×40 2×1.1/2 60.3×48.3 57×45 76
50×32 2×1.1/4 60.3×42.4 57×38 76
50×25 2×1 60.3×33.7 57×32 76
50×20 2×3/4 60.3×26.9 57×25 76
65×50 2.1/2×2 73.0×60.3 76×57 89
65×40 2.1/2×1.1/2 73.0×48.3 76×45 89
65×32 2.1/2×1.1/4 73.0×42.4 76×38 89
65×25 2.1/2×1 73.0×33.7 76×32 89
80×65 3×2.1/2 88.9×73.0 89×76 89
80×50 3×2 88.9×60.3 89×57 89
80×40 3×1.1/2 88.9×48.3 89×45 89
80×32 3×1.1/4 88.9×42.4 89×38 89
90×80 3.1/2×3 101.6×88.9 - 102
90×65 3.1/2×2.1/2 101.6×73.0 - 102
90×50 3.1/2×2 101.6×60.3 - 102
90×40 3.1/2×1.1/2 101.6×48.3 - 102
90×32 3.1/2×1.1/4 101.6×42.4 - 102
100×90 4×3.1/2 114.3×101.6 - 102
100×80 4×3 114.3×88.9 108×89 102
100×65 4×2.1/2 114.3×73.0 108×76 102
100×50 4×2 114.3×60.3 108×57 102
100×40 4×1.1/2 114.3×48.3 108×45 102
125×100 5×4 141.3×114.3 133×108 127
125×90 5×3.1/2 141.3×101.6 - 127
125×80 5×3 141.3×88.9 133×89 127
125×65 5×2.1/2 141.3×73.0 133×76 127
125×50 5×2 141.3×60.3 133×57 127
150×125 6×5 168.3×141.3 159×133 140
150×100 6×5 168.3×114.3 159×108 140
150×90 6×3.1/2 168.3×101.6 - 140
150×80 6×3 168.3×88.9 159×89 140
150×65 6×2.1/2 168.3×73.0 159×76 140
200×150 8×6 219.1×168.3 219×159 152
200×125 8×5 219.1×141.3 219×133 152
200×100 8×4 219.1×114.3 219×108 152
200×90 8×3.1/2 219.1×101.6 - 152
250×200 10×8 273.0×219.1 273×219 178
250×150 10×6 273.0×168.3 273×159 178
250×125 10×5 273.0×141.3 273×133 178
250×100 10×4 273.0×114.3 273×108 178
300×250 12×10 323.9×273.1 325×273 203
300×200 12×8 323.9×219.1 325×219 203
300×150 12×6 323.9×168.3 325×159 203
300×125 12×5 323.9×141.3 325×133 203
350×300 14×12 355.6×323.9 377×325 330
350×250 14×10 355.6×273.0 377×273 330
350×200 14×8 355.6×219.1 377×219 330
350×150 14×6 355.6×168.3 377×159 330
400×350 16×14 406.4×355.6 426×377 356
400×300 16×12 406.4×323.9 426×325 356
400×250 16×10 406.4×273.0 426×273 356
400×200 16×8 406.4×219.1 426×219 356
450×400 18×16 457×406.4 478×426 381
450×350 18×14 457×355.6 478×377 381
450×300 18×12 457×323.9 478×325 381
450×250 18×10 457×273.0 478×273 381
500×450 20×18 508×457 529×478 508
500×400 20×16 508×406.4 529×426 508
500×350 20×14 508×355.6 529×377 508
500×300 20×12 508×323.9 529×325 508
550×500 22×20 559×508 - 508
550×450 22×18 559×457 - 508
550×400 22×16 559×406.4 - 508
550×350 22×14 559×355.6 - 508
600×550 24×22 610×559 - 508
600×500 24×20 610×508 630×529 508
600×450 24×18 610×457 630×478 508
600×400 24×22 610×406.4 630×426 508
650×600 26×24 660×610 - 610
650×550 26×22 660×559 - 610
650×500 26×20 660×508 - 610
650×450 26×18 660×457 - 610
700×650 28×26 711×660 - 610
700×600 28×24 711×610 720×630 610
700×550 28×22 711×559 - 610
700×500 28×20 711×508 720×530 610
750×700 30×28 762×711 - 610
750×650 30×26 762×660 - 610
750×600 30×24 762×610 - 610
750×550 30×22 762×559 - 610
800×750 32×30 813×762 - 610
800×700 32×28 813×711 820×720 610
800×650 32×26 813×660 - 610
800×600 32×24 813×610 820×630 610
850×800 34×32 864×813 - 610
850×750 34×30 864×762 - 610
850×700 34×28 864×711 - 610
850×650 34×26 864×660 - 610
900×850 36×34 914×864 - 610
900×800 36×32 914×813 920×820 610
900×750 36×30 914×762 - 610
900×700 36×28 914×711 920×720 610
950×900 38×36 965×914 - 610
950×850 38×34 965×864 - 610
950×800 38×32 965×813 - 610
950×750 38×30 965×762 - 610
1000×950 40×38 1016×965 - 610
1000×900 40×36 1016×914 1020×920 610
1000×850 40×34 1016×864 - 610
1000×800 40×32 1016×813 1020×820 610
1050×1000 42×40 1067×1016 - 610
1050×950 42×38 1067×965 - 610
1050×900 42×36 1067×914 - 610
1050×850 42×34 1067×864 - 610
1100×1050 44×42 1118×1067 - 610
1100×1000 44×40 1118×1016 1120×1020 610
1100×950 44×38 1118×965 - 610
1100×900 44×36 1118×914 1220×920 610
1150×1100 46×44 1168×1118 - 711
1150×1050 46×42 1168×1067 - 711
1150×1000 46×40 1168×1016 - 711
1150×950 46×38 1168×965 - 711
1200×1150 48×46 1220×1168 - 711
1200×1100 48×44 1220×1118 1220×1120 711
1200×1050 48×42 1220×1067 - 711
1200×1000 48×40 1220×1016 1220×1020 711

ASTM Specification of Eccentric Reducer

  • Carbon Steel Eccentric Reducer Schedule 80
    • ASTM A234 WPB Eccentric Buttweld Reducer
    • ASTM A420 WPL6 Eccentric Reducer Schedule 40
  • Alloy Steel High-Temp Eccentric Pipe Reducer
    • ASTM A234 WP5 Eccentric Buttweld Reducer
    • ASTM A234 WP11 Eccentric Reducer b16.9
    • ASTM A234 WP9 Eccentric Reducer Schedule 40
    • ASTM A234 WP22 Grooved Eccentric Reducer
    • ASTM A234 WP91 Eccentric Reducer
  • Austenitic Stainless Steel Eccentric Reducer
    • ASTM A403 Gr F304 Eccentric Reducer Schedule 80
    • ASTM A403 Gr F316 Eccentric Reducer Schedule 40
    • ASTM A403 Gr F321 Eccentric Reducer
    • ASTM A403 Gr F347 Eccentric Reducer b16.9
    • ASTM A403 Gr F304L Grooved Eccentric Reducer
    • ASTM A403 Gr F316L Eccentric Reducer b16.9
    • ASTM A403 Gr F317 Eccentric Reducer Schedule 40
    • ASTM A403 Gr F317L Eccentric Pipe Reducer
    • ASTM A403 Gr F321 Eccentric Reducer Schedule 80
    • ASTM A403 Gr F310 Eccentric Reducer b16.9
    • ASTM A403 Gr 347 Eccentric Buttweld Reducer
  • Nickel Alloy Eccentric Reducer Schedule 80
    • ASTM B564 Grooved Eccentric Reducer
    • astm b564 uns n06600 Eccentric Buttweld Reducer
    • astm b564 uns n06625 Eccentric Reducer
    • astm b564 uns no4400 Eccentric Pipe Reducer
    • astm b564 uns n08810 Eccentric Reducer Schedule 40
    • astm b564 uns n08811 Eccentric Reducer Schedule 80
    • astm b564 uns n08825 Eccentric Buttweld Reducer
    • astm b564 uns n04400 Grooved Eccentric Reducer
    • astm b564 uns n10276 Eccentric Reducer
    • astm b564 uns n10665 Eccentric Pipe Reducer

Manufacturing Stainless Steel Eccentric Reducer in India, Red Earth Steels Pvt Ltd holds a wide range of Alloy Steel Eccentric Reducer b16.9 in all Thickness, stock for immediate despatch throughout India & globally.

Supplying Eccentric Reducer to our worldwide clients:

Red Earth Steels Pvt Ltd is a Govt. approved certified Carbon Steel Eccentric Pipe Reducer exporter in India. All of our Stainless Steel Grooved Eccentric Reducer are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. We are well-known as a trusted vendor as a Alloy Steel Eccentric Buttweld Reducer distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

 

SS Eccentric Reducer and Eccentric Reducer Schedule 40 Manufacturer in India, Supplier of Eccentric Reducer Material and Eccentric Reducer B16.9 in Indonesia
We have manufactring unit of Stainless Steel Eccentric Reducer and Eccentric Reducer Carbon Steel in Mumbai, Check SS Eccentric Reducer Dimensions